A little healthy paranoia can go a long way. This is especially true for electrical work around the home where electrical accidents are the cause of tens of thousands of fires, injuries, and deaths each year. What you don’t even know that you don’t know is a dangerous area. Ignorance is definitely not bliss! The first rule? Know what you are doing! We surveyed several of our Pro electricians and they gave us some electrical safety tips to help guide you aspiring tradesmen and apprentice electricians when wiring a home.
Table of Contents
Make SURE You Turn Off the Power – Lock Out/Tag Out
You can greatly reduce the immediate danger of electrical work by being sure that the power is off and stays off during the job. This has to fall under the most critical of electrical safety tips. Even if you’ll be near the switch or service panel, it’s a good idea to tape switches off and even lock panels. There’s a reason industrial sites use “lock out/tag out” safety procedures. It’s not that everyone will flip the switch. It’s that one ignorant person might.
Include a note that alerts anyone approaching the panel that the power must remain off. Just as you would treat every firearm as if it was loaded, treat each wire as if it was live. Use a small, non-contact voltage tester to verify there’s no current. I’ve known several electricians with horror stories about “helpful” coworkers who flipped a breaker on a little too early.
Wear Proper PPE
Many new electricians neglect to wear proper protective gear because they think the job will only take a few minutes. The danger only exists for the other guy who didn’t watch enough YouTube videos about parallel circuits, right?
But how often do you see the scope of work increase, the job take longer, or an accident happen that you didn’t intend? (Isn’t that what an accident is, after all?)
For that reason, be sure your eyes are protected from stiff copper wire, electrical arcs, attic insulation, and other risks. Wear boots or thickly-soled shoes to reduce the chance that you slip in an attic and become part of a remodeling project. Gloves are always a good idea, too.
Be Aware of Your Surroundings
No matter what precautions you take, always be aware of your surroundings. Never stand in water or a puddle while you work on electricity. It sounds obvious at first, but a good portion of a house is taken up by laundries, kitchens, and baths where water and electricity exist in close proximity. One of the most important electrical wiring safety tips includes simply avoiding anything that would make you become part of the circuit.
Practice Makes Perfect – Details Matter with Electrical Safety
Electrical work itself must ensure that the house and its occupants remain safe after the job is complete. Ensure you wire outlets correctly and make all of your connections securely. If you have an older home, don’t just replace a two-slot outlet with an ungrounded three-slot outlet…even if the homeowner really wants to save money.
Use GFCI outlets in laundries, kitchens, and baths. Check your work with circuit testers. Junction and outlet boxes ensure that sparks caused by faulty or loose wiring don’t touch combustible building materials.
Also, when doing new electrical work, leave enough wire to easily complete the outlet. Many newbies leave the wires too short. This results in weak connections that loosen over time. Inexperienced electricians also attempt to fit too many wires into a single junction box or use shallow boxes that can’t handle the amount of wiring needed. Neither condition passes our electrical safety tips threshold.
Keep the wires neatly folded and labeled in multi-switch boxes. Boxes must also be flush with the wall and not recessed, so potential sparks don’t have access to anywhere they might cause a fire.
Getting into those habits now will make them second nature to you as your career grows. They will help you maintain an excellent reputation, keeping your clients calling back and referring you to their friends.
Pro Tip: The habits you form as an apprentice will be the foundation of your reputation later in your career. Train to be the guy everyone calls first!
Final Electrical Safety Tips
Safety during and after the job is of the utmost importance, so err on the side of caution. If an outlet or service panel is hot, it may be time to call in the Pros. The same is true if an appliance greets you with a small shock now and then. Troubleshooting miswired grounds can be dangerous if not handled properly.
Exposed wires need to be run through conduit and placed out of the way. Loose outlets can wiggle with use, and the attached wires can loosen over time. This can cause sparks—and potentially a fire. Remember, electrical fires need a fire extinguisher, not water. Come to think of it—do you have a fire extinguisher in your vehicle? There’s more than just electrical wiring safety tips to consider!
One other thing you want to be sure of is your local codes. Newer codes require things like installing Arc Fault interrupters, which prevent slow draws of current from starting a fire. This is typically required for bedrooms and other areas where you may puncture a wall and create a short that doesn’t instantly trip a breaker.
Wrapping It Up
Finally, we’d be remiss if we didn’t encourage all work to be done to code and inspected. It’s not worth losing your license or reputation doing work off the books just to make a few extra bucks.
Having the skill to complete home electrical jobs is very satisfying—use these tips to be sure it’s very safe, too. We hope you’ve learned something good from these electrical wiring safety tips. If you’re a Pro and you have wiring tips to share, add them in the comments below—or contact us with your own Pro tips.
If I were to do my own electrical work, I would for sure want to stay safe. As you said here, you need to make sure that all electrical components in the house are safe to use after the job is done. Chances are, I might look into hiring a contractor to do the work for me as I wouldn’t want to risk hurting myself or someone in my home.
I have known many stories that started with a small fire due to some small electrical fault and it costs their home and safety. Always a go with the professional, it is a smart choice to get your work done by them.
I agree that you have to make sure it’s safe even after you finish the job. Faulty wiring can be very dangerous to you even after it’s installed. You don’t want to start a fire! Being extra careful is a good idea, even if that means hiring a professional to do the job for you.
This is really helpful! Thank you for talking about if an outlet is hot it is time to call in the professionals. I can see that paying attention to this can help you not only save on your utility bills but also avoid accidents. Calling for a professional is a wise choice to take also!
It’s great that you mention how some newbies might leave wires too short wish will eventually lead to weak connections. I have a friend who is looking to get an electrical repair tool but needs tips on finding a reliable professional. I’ll be sure to talk to him about checking reviews about the expert in order to know if the repairs last long.